Cisco 15327 - Manual (Page 304)

18-12
Ethernet Card Software Feature and Configuration Guide, R7.2
Chapter 18 Configuring Ethernet over MPLS
Monitoring and Verifying EoMPLS
no ip address
spr-intf-id 1
crc 32
!
router ospf 1
log-adjacency-changes
network 1.1.1.0 0.0.0.255 area 0
network 10.10.10.0 0.0.0.255 area 0
!
ip classless
no ip http server
Example 18-4 ML-Series Card D Configuration
bridge 20 protocol ieee
!
!
interface SPR1
no ip address
no keepalive
bridge-group 20
hold-queue 150 in
!
interface GigabitEthernet0
no ip address
bridge-group 20
Monitoring and Verifying EoMPLS
Table 18-2 shows the privileged EXEC commands for monitoring and verifying EoMPLS.
Table 18-2 Commands for Monitoring and Maintaining Tunneling
Command Purpose
show mpls l2transport vc Provides information about all EoMPLS tunnels.
show mpls l2transport vc detail Provides detailed information about the EoMPLS
tunnel.
show mpls l2transport vc vc-id Provides information about a specific EoMPLS
tunnel.