Cisco 15327 - Manual (Page 92)

5-12
Ethernet Card Software Feature and Configuration Guide, R7.2
Chapter 5 Configuring POS
ML-Series Card to Cisco 12000 GSR-Series Router
log-adjacency-changes
network 192.168.1.0 0.0.0.255 area 0
network 192.168.2.0 0.0.0.255 area 0
Example 5-4 shows the commands associated with the configuration of ML Series B.
Example 5-4 ML-Series Card B Configuration
hostname ML_Series_B
!
interface FastEthernet0
ip address 192.168.3.1 255.255.255.0
!
interface POS0
ip address 192.168.2.2 255.255.255.0
crc 32
pos flag c2 1
!
router ospf 1
log-adjacency-changes
network 192.168.2.0 0.0.0.255 area 0
network 192.168.3.0 0.0.0.255 area 0
!
ML-Series Card to Cisco 12000 GSR-Series Router
Figure 5-2 illustrates a POS configuration between an ML-Series card and a Cisco 12000 GSR-Series
router. PPP/BCP encapsulation or Cisco HDLC encapsulation may be used for interoperation.
Figure 5-2 ML-Series Card to Cisco 12000 Series Gigabit Switch Router (GSR) POS Configuration
Example 5-5 shows the commands associated with configuration of ML-Series card A.
Example 5-5 ML-Series Card A Configuration
hostname ML_Series_A
!
interface FastEthernet0
ip address 192.168.1.1 255.255.255.0
!
!
interface POS0
ip address 192.168.2.1 255.255.255.0
encapsulation ppp
ONS 15454
with ML100T-12
fast ethernet 0
pos 1/0 pos 0
fast ethernet 0
ML_Series_A
SONET/SDH
192.168.1.1
192.168.2.1 192.168.2.2
192.168.3.1
Cisco 12000 Series
Gigabit Switch Router
(GSR)
83126