Lab.gruppen PLM 20K44 - Manual (Page 105)

100
Lake Controller Operation Manual Rev 1.5.4
EQ/Levels Menu Reference
3. Enter the value using the on-screen (or external) keyboard, and tap OK.
4. Tap FILTER EDIT again to exit this mode.
6.4.11 Analyzer Tap to Search
Please refer to section 6.3.13 for details on this function.
6.5 Auxiliary Output Channels
Contour Modules provide various options to configure channels as auxiliary outputs. Up to 12 individually
configured auxiliary outputs can be created. The Auxiliary Output Module files allow full-bandwidth custom
settings to be configured by the user. Independent Aux tabs are provided for each output channel instead of
a unified crossover tab. These tabs are provided in addition to the PEQ and GEQ overlays that still apply to
all outputs for the Module.
Because a different process is used to calculate output-specific EQ, the Mesa filter is not available. How-
ever, in addition to low-shelf, high-shelf, and parametric filters, the Auxiliary Output Modules provide both
low-pass and high-pass filters. In Designer Mode, all-pass filters are also available.
6.5.1 Auxiliary Output Module Types and Combinations
This section describes the available Auxiliary Output Module types along with the combinations of Modules
that are allowed.
6.5.1.1 One Auxiliary Output
The 1-Auxiliary Outputs Module is automatically recalled into Module B/D when a Classic 5-Way Module is
recalled into Module A/C. This Module type cannot not be used in Module A/C.
6.5.1.2 Two Auxiliary Outputs
The 2-Auxiliary Outputs Module may be recalled into any Module. The other Modules of the Frame may
contain any Classic or Linear Phase Module that uses two or three output channels.
6.5.1.3 Three Auxiliary Outputs
The 3-Auxiliary Outputs Module may be recalled into any Module. The other Modules of the Frame may
contain any Classic or Linear Phase Module that uses two or three output channels.