Lab.gruppen PLM 20K44 - Manual (Page 185)

180
Lake Controller Operation Manual Rev 1.5.4
Solo/Mute Menu Reference
Figure 11-1: Solo/Mute
11.3 Pile
The Pile function allows for multiple Modules or Groups to solo at the same time.
1. Tap SOLO/MUTE ENABLE from the SOLO/MUTE menu. The button illuminates orange.
2. Tap PILE. The button illuminates orange.
3. Tap a Module or Group icon to solo. Repeat for other Modules or Groups to solo.
4. Tap SOLO/MUTE ENABLE again to exit this function.
11.4 All Mute
To mute all Modules in a system, perform the following steps:
1. Tap SOLO/MUTE ENABLE from the SOLO/MUTE menu. The button illuminates orange.
2. Tap ALL MUTE.
3. Tap SOLO/MUTE ENABLE or SOLO/MUTE EXIT to resume normal status.