Command line options, 1 overview, 2 reference – Lab.gruppen PLM 20K44 User Manual
Page 294: 1 overview 25.2 reference, Chapter 25, command line options, p, Command line options 289
Lake Controller Operation Manual Rev 1.5.4
Command Line Options
289
25. Command Line Options
25.1 Overview
The Lake Controller provides a number of command-line options to enable or disable certain functionality.
These options may be entered when launching the Controller from a command prompt, or may be set using
a shortcut’s target option.
As an example, the following steps describe how to configure a shortcut on the desktop to launch the
Lake Controller in daylight mode:
1. Right-click on the Microsoft Windows desktop and select NEW > SHORTCUT.
2. When asked for the location of the item type the following, ensuring you use quotation marks as shown
below, and exchanging LAKE CONTROLLER vX.X for the Lake Controller the installation directory.
”C:\Program Files\Lake\Lake Controller vX.X\Lake Controller.exe” daylight
3. Tap NEXT.
4. When asked for a shortcut name, enter OUTDOOR.
5. Tap FINISH.
Multiple shortcut command line options may be
used by separating them with a space.
25.2 Reference
Table 25-1 on page 290 describes the options for command line functionality.