Lab.gruppen PLM 20K44 - Manual (Page 192)

Lake Controller Operation Manual Rev 1.5.4
Pages Menu Reference
187
14.2 Copy Icon
The COPY ICON button is active only when a Module or Group icon is selected. More than one copy of an
icon can exist on different pages.
To copy an icon, perform the following steps:
1. Tap a Module or Group icon on the work area.
2. Tap COPY ICON.
3. Select another page using the tabs at top of screen, or tap ADD PAGE if no other pages exists.
4. Tap PASTE ICON.
There can be only one instance of an icon on each
page.
14.3 Paste Icon
The PASTE ICON button is active only after a CUT ICON or COPY ICON action. When tapped, this button
will paste a copy of the icon currently in memory to the currently selected page.
Icons can also be moved by selecting and dragging
the icon to a page tab at the top of the screen.
Select and drag the icon/s to the required page tab
then release in the required location.
14.4 Page Label
The PAGE LABEL button is always active.
To label a page, perform the following steps:
1. Select the page to be labeled (top of screen).
2. Tap PAGE LABEL.
3. Enter the label using either the on-screen or external keyboard.
4. Tap OK.