Lab.gruppen PLM 20K44 - Manual (Page 182)

Lake Controller Operation Manual Rev 1.5.4
Groups Menu Reference
177
10.5.2 Paste
The PASTE button is active only when Group data has been previously copied and a Group icon is selected.
To paste data to a Group, tap the Group icon in which to paste the copied data then tap PASTE.
The Paste operation overwrites all the destination
Group’s EQ and Levels settings, but not the Module
label or Module assignments.
10.6 Remove
This function removes the selected Group from the current system configuration. To remove a Group, select
the Group icon, tap REMOVE, then tap YES to the warning message.
The warning message is displayed only if the Group has Modules assigned to it. The Group icon reappears
in the scroll bar indicating it is not currently in use.
A Group can also be removed by dragging the icon
back to the GROUPS scroll bar.
10.7 Gang
Tapping this button activates a scroll bar containing all Modules currently assigned to the selected Group,
along with a submenu.
Figure 10-3: Group Gang Menu
10.7.1 Gang Xover/Aux or Gang HPF/LPF
This button read GANG XOVER/AUX when a Group containing Contour Modules is selected, and GANG
HPF/LPF when a Group containing Mesa EQ Modules is selected. These functions allow the crossovers,
auxiliary output channels, and HPF/LPF settings of Modules on different Frames to be linked together.