3 recall as new system—open, 4 recall as subsystem, 5 recall compare – Lab.gruppen PLM 20K44 User Manual
Page 114: System store recall menu reference 109
Lake Controller Operation Manual Rev 1.5.4
System Store Recall Menu Reference
109
7.3 Recall as New System—Open
The function and label of the button depend on whether a folder or file is selected. The button is inactive
when neither a file nor folder is selected.
The button is labeled OPEN when a folder is selected.
To open a folder:
1. Tap the desired folder icon
The selection is indicated by a yellow border.
2. Tap OPEN. Double-tapping the folder icon also opens the folder.
The button is labeled RECALL AS NEW SYSTEM when a file is selected; recalling the file will clear all
current settings from the Controller and load the details stored in the file into the associated devices.
To recall a system configuration file as a new system:
1. Tap the desired file to recall.
2. Tap RECALL AS NEW SYSTEM.
3. Confirm the action by tapping the YES button on the warning message.
RECALL AS NEW SYSTEM overwrites current settings
in associated Lake devices and will affect audio
processing. Presets stored in hardware devices are not
overwritten during a system file recall.
7.4 Recall as Subsystem
RECALL AS SUBSYSTEM enables the content of a system configuration file to be added to the current
system configuration.
This function adds the Modules, Super Modules, and Groups to your current configuration, or replaces
the data if the device is already in use. This function does not automatically arrange icons so they do not
overlap. Be careful to either move existing icons before loading a sub-system, or ensure icons are placed
appropriately in the stored files.
7.5 Recall Compare
RECALL COMPARE enables comparison of a system configuration file with the system configuration that is
currently active in the Lake device. This button is active only when a file is selected.