Lab.gruppen PLM 20K44 - Manual (Page 63)

58
Lake Controller Operation Manual Rev 1.5.4
Lake Controller Tutorial
4. Tap the ASSIGN button, and tap the icons for Modules A and B to assign them to the Group. Assigned
Modules are highlighted with a yellow border.
Figure 4-51: Assigning Modules to a Group
5. Tap the ASSIGN button again to exit ASSIGN mode.
6. Tap GROUPS EXIT or HOME to return to the MAIN page.
4.7 Lake Controller File Types
Before saving the simple configuration just created, it is useful to learn about the file types used to store and
recall settings within the Lake Controller software. The following sections describe the various file types.
4.7.1 Base Configuration Files
A base configuration file defines a starting point for the Module setup. It can contain EQ, crossover, and
level settings that can be hidden or protected from end-user adjustment. The result of all EQ, levels, and
crossover settings for the Module, and any Group that it belongs to, can be combined and stored in the base
configuration file.
Figure 4-52: Contour [.cbm] & Mesa [.mbm] Base Configuration Files