Lab.gruppen PLM 20K44 - Manual (Page 234)

Lake Controller Operation Manual Rev 1.5.4
Designer Mode Menu Reference
229
19.3 Functional Reference Guide
This section provides an overview of the steps required for each Designer Mode process. This can be used
as a quick reference for the features described throughout the tutorial based on the procedure or function.
This section describes the standard functions using the LEVELS, XOVER, and EQ screens.
Designer Mode must be active to access the
functions described in this section.
19.3.1 Xover/Aux/HPF/LPF Functions
These functions apply to base configurations and Modules only. The XOVER buttons listed below could read
Aux Output or HPF/LPF depending on the Module type.
19.3.1.1 Set Individual Xover Screens to Hide/View Only
1. Navigate to the XOVER screen.
2. Tap CROSSOVER FUNCTIONS.
3. Tap CROSSOVER VIEW ONLY or CROSSOVER HIDE.
The selected status illuminates orange.
The same process applies to AUX and HPF/LPF.
19.3.1.2 Set All Xover/Aux or HPF/LPF Screens to Hide/View Only
This process will affect all XOVER/AUX/HPF/LPF screens in the current system configuration.
1. From HOME, tap USER PREFERENCES.
2. Tap GLOBAL ACCESS.
3. Tap CROSSOVER HIDE or CROSSOVER VIEW ONLY.
The selected status illuminates orange.