Lab.gruppen PLM 20K44 - Manual (Page 15)

10
Lake Controller Operation Manual Rev 1.5.4
Software Installation
2.2 Lake Controller Installation
2.2.1 First Time Lake Controller Installation
To install the Lake Controller software suite, insert the installer CD-ROM or USB key into your
computer or double-tap the executable installer that was downloaded via the Internet; choose
INSTALL LAKE CONTROLLER then follow the on-screen setup instructions.
1. Read installation information, and tap NEXT to proceed through the installation dialog boxes.
2. Tap INSTALL when requested.
3. Tap FINISH when installation is complete.
Following successful installation, the Lake Controller icon appears on the desktop.
Before using the Lake Controller with a network of
Lake devices, please follow the configuration
procedures described in chapter 3.
2.2.2 Overwriting Existing Lake Controller Installation
Overwriting an existing installation requires that both the Installation and Shortcut folders be identical to
those of the existing installation.
If you decide to overwrite your existing installation, ensure that you specify the same location during the
software installation process.
2.2.3 Multiple Lake Controller Installations
If you wish to retain previous versions of the Lake Controller, please ensure that the installation location
specified during software installation is unique.
Only one instance of the software may be used at
any one time. Be aware that different versions of the
software are only compatible with certain firmware
versions.