Pitney Bowes DP50S Color Printer - Manual (Page 108)

3
3. Making Printer Settings Using the Control Panel
110
• Default: Use Driver/Command
• If you select Use Machine Settings, enter a value between 0 and 999. (Default: 300)
Data Format
Select the data format from Binary Data or TBCP.
This setting is ineffective when using a parallel or EtherTalk connection.
When using a parallel or USB connection, the print job is canceled if binary data is sent from the
printer driver.
When using an Ethernet connection, the print job is canceled if:
• The printer driver data format is TBCP and the data format selected using the control panel is
Binary Data.
• The printer driver data format is binary and the data format selected using the control panel is
TBCP.
• Default: Binary Data
Resolution
Select the resolution.
• 600dpi Fast
• 600dpi Std.
• 600dpi Hq.
• 1200dpi
• Default: 600dpi Std.
Color Setting
Specify the RGB setting for the PDF file executing PDF Direct
Print.
• None
• Fine
• Super Fine
• Default: Super Fine
Color Profile
Specify the color profile for the PDF file executing PDF Direct Print.
• Auto