Pitney Bowes DP50S Color Printer - Manual (Page 170)

4
4. Monitoring and Configuring the Printer
NBT (NetBIOS over TCP/IP) Scope ID Selection You can specify
the NBT scope ID.
msh> wins “interface_name” scope “scope ID”
• The scope ID can be entered using up to 31 alphanumeric characters.
• Be sure to specify the interface.
• wlan can be specified only when the wireless LAN interface unit is installed.
wsmfp
Use the “wsmfp” command to view and configure WS-MFP settings.
View settings
msh> wsmfp
Comment settings
msh> wsmfp comments “comment”
• If you do not specify a comment, current setting is displayed.
Location configuration
mah> wsmfp location “location”
• If you do not specify a comment, current setting is displayed.
Presentation URL configuration
msh> wsmfp url “URL”
• Ebter the URL string in the “URL”.
WS-Device TCP port configuration
msh> wsmfp devport “port_number”
• The Default is 53000.
WS-Printer TCP port configuration
msh> wsmfp prnport “port_number”
• The Default is 53001.
Timeout configuration
msh> wsmfp prntimeout [30-65535]
172
Interface name Interface configured
ether Ethernet interface
wlan Wireless LAN interface