Pitney Bowes DP50S Color Printer - Manual (Page 99)

• Default : Per Job
Spool Printing
Specify whether or not to complete spooling before starting to print.
• On
• Off
5
• Default: Off
• Spooling stores a sent print job temporarily in the printer, and then prints it.
RAM Disk
• 0MB
• 2MB
• 4MB
• 8MB
• 16MB
System Menu
B&W Page Detect
Specify whether to recognize black-and-white images by page or by document. Black-and-
white recognition function allows the printer to print monochrome images in monochrome
mode even if color printing is specified.
• Per Page
• Per Job
• When the amount of SDRAM is small and [RAM Disk] is set to [16MB], printing may not
be possible depending on the print job and duplex printing may be canceled. If this hap-
pens, increase the amount of SDRAM, or set [RAM Disk] to [8MB] or less.
• Default: 4MB
• This menu appears only when the hard disk is not installed.
• For details about the optional SDRAM module, see Hardware Guide.
Auto Email Notify
Specify whether or not to send an error message to a preset e-mail address when an error oc-
curs in the printer.
101
3