Wins – Pitney Bowes DP50S Color Printer User Manual
Page 169
4
Remote Maintenance by telnet
• You can use this command only when the wireless LAN interface unit is installed.
wins
Use the “wins” command to configure WINS server settings.
Viewing settings
msh> wins
• If the IPv4 address obtained from DHCP differs from the WINS IPv4 address, the DHCP ad-
dress is the valid address.
Configuration
msh> wins “interface_name” {on | off}
• {on} means “active” and {off} means “inactive”.
• Be sure to specify the interface.
• wlan can be specified only when the wireless LAN interface unit is installed.
Address configuration
Use the following command to configure a WINS server IP address:
msh> wins
“interface_name” {primary|secondary} “IP address”
• Use the “primary” command to configure a primary WINS server IPv4 address.
• Use the “secondary” command to configure a secondary WINS server IPv4 address.
• Do not use “255.255.255.255” as the IPv4 address.
171
Parameter
Value configured
imca {on | off}
You can enable or disable the certificate when-
the intermediate certificate authority is present.
The default is “off”.
srvid “character string”
You can set the server ID and subdomain of
thecertificate server.
Interface name
Interface configured
ether
Ethernet interface
wlan
Wireless LAN interface