Pitney Bowes DP50S Color Printer - Manual (Page 149)

4
Remote Maintenance by telnet
msh> IPP user name:user1
msh> IPP password:*******
After configuring the settings, the following message appears:
User configuration changed.
ipv6
Use the “ipv6” command to display and configure IPv6 settings.
View setting
msh> ipv6
IPv6 stateless address
msh> ipv6 stateless {on|off}
lpr
Use the “lpr” command to view and configure LPR settings.
View setting
msh> lpr
Checking host name when deleting the job
msh> lpr chkhost {on|off}
If “on” is selected, you can delete print jobs only from the IP address of the host that sent the print job.
If LPR is disabled, you can also delete print jobs sent from IP addresses other than that of the host.
Printer Error Detection Function
lpr prnerrchk {on|off}
If you set this to “on”, the printer stops receiving data and will wait until the error is resolved before
continuing processing a job.
netware
Use the “netware” command to configure the NetWare settings such as the print server name or
file server name.
Netware printer server names
msh> netware pname “character string”
• Enter the NetWare print server name using up to 47 characters.
151