Pitney Bowes DP50S Color Printer User Manual
Page 167
4
Remote Maintenance by telnet
169
Parameter
Value configured
wepauth [open|shared]
You can set an authorization mode when using
WEP. The specified value and authorized mo-
deare as follows:open: open system authorized
(default)shared: shared key authorized rate
rate [auto|11m|5.5m|2m|1m]
You can set the wireless LAN transmitting
speed.
The speed you specify here is the speed at
whichdata is sent. You can receive data at any
speed.auto: automatically set (default)
11m: 11 Mbps fixed
5.5m: 5.5 Mbps fixed
2m:2 Mbps fixed
1m: 1 Mbps fixed
security {none|wep|wpa}
You can specify the security mode.none: No
encryption(default)Swep: WEP encryptionwpa:
WPA encryption
wpaenc {tkip|ccmp}
You can specify WPA encryption key when
using
WPA encryption.tkip: TKIP (default)ccmp:
CCMP (AES)
wpaauth {wpapsk | wpa}
You can specify the WPA authentication mode-
when using WPA encryption.wpapsk: WPA-
PSK authentication(default)wpa: WPA(802.1X)
authentication
psk “character string”
You can specify the Pre-Shared key.
Usable characters: ASCII 0x20-0x7e (8 to 63
bytes).
The default is blank.