Pitney Bowes DP50S Color Printer - Manual (Page 180)

4
4. Monitoring and Configuring the Printer
182
Message Problem and solutions
SMTPC: failed to get smtp server ip-address.
The SMTP server IP address could not be
obtained.
This could be because:
• The specified DNS server could not be found.
• No connection to the network has been
established.
• The specified DNS server could not be found.
• An incorrect DNS server is specified.
• The specified SMTP server IP address could
not be found in the DNS server.
SMTPC: no smtp server. connection close.
Connection to the SMTP server failed due to
noresponse from SMTP. This could be be-
cause aserver other than the SMTP server has
beenspecified, or the specified SMTP server
port numberis incorrect. Check the SMTP server
name, portnumber, or the SMTP server port
number.
SMTPC: refused connect by smtp server.
Connection to the SMTP server is denied. This
couldbe because server other than the SMTP
server hasbeen specified, or the specified SMTP
server portnumber is incorrect. Check the SMTP
server name,port number, or the SMTP server
port number.
SMTPC: username or password wasn’t correct.
[response code] (information)
Connection to the SMTP server failed, because
thespecified SMTP user name is incorrect, or
thespecified SMTP password is incorrect. Check
the
SMTP user name and password.
Snmp over IPv4 is ready Communication over IPv4 with snmp is available.
Snmp over IPv6 is ready. Communication over IPv6 with snmp is available.
Snmp over IPX is ready. Communication over IPX with snmp is available.
snmpd start. The snmpd service has started.
The print server received error <error
number>during attempt to log in to the network.
Access tothe network was denied . Verify that the
print servername and password are correct . Login to the file server failed. The print server is
notregistered or a password is specified. Register
theprint server without specifying a password.