Pitney Bowes DP50S Color Printer - Manual (Page 190)

5
5. Mac OS Configuration
• “Sample Print” Deleting a Sample Print File
1. Press [Prt.Jobs].
A list of print files stored in the printer appears.
2. Select [Sample Print Jobs], and then press [Job List].
A list of sample print files stored in the printer appears.
3. Select the file you want to delete by pressing it. To cancel a selection, press the highlighted jobs again.
Only one file can be selected at a time.
4. Press [Delete].
A confirmation screen appears.
5. Press [Delete] to delete the file.
After the file is deleted, the printer screen reappears.
• Press [Cancel] to cancel the delete request.
Using locked print
192
• You need Mac OS X v10.2 or higher to use this function.
• The number of pages the printer can save varies depending on the contents of the print images. At
most, the printer can save 100 jobs or 9,000 pages for Sample Print, Locked Print and Hold Print.
• Locked Print files will not appear on the display panel if they have already been printed or deleted using
Web Image Monitor before you select [Locked Print] using the control panel.
• Locked Print files printed or deleted using Web Image Monitor after you have selected [Locked Print] us-
ing the control panel will still appear on the display panel. However, an error message will appear if you
try to print or delete those Locked Print files.
• If the application has a collate option, make sure that it is not selected before sending a print job. By
default, locked print jobs are automatically collated by the printer driver. If the collate option is selected
in the application print dialog box, more prints than intended may be printed.
• Print jobs are not saved on the hard disk in the following cases. You can check the error log for jobs not
saved.
• When there are 100 Sample Print, Locked Print, Hold Print and Stored Print jobs saved on the
hard disk.