Pitney Bowes DP50S Color Printer - Manual (Page 178)

4
4. Monitoring and Configuring the Printer
180
Message Problem and solutions
Login to fileserver <file server name>(<IPX|
IP>,<NDS|BINDERY>) (In the print server mode) Login to the file server
isin the NDS or BINDERY mode.
Manual[%s] is disable, set authentication key.
Manual[%s] is disable, set encryption key.
Name registration failed. name=<NetBIOS
name>
Name registration of <NetBIOSName> failed.
Change to different NetBIOS name.
Name registration success . WINS Serv-
er =<WINSserver address> NetBIOS
Name=<NetBIOSname> Name registration of <NetBIOS Name> to
<WINSserver address> was successful.
Name registration success in Broadcast
name=<NetBIOS name> Name registration by Broadcast name
of<NetBIOS Name> was successful.
npriter start. (NetWare)
(In the remote printer mode) The NetWare ser-
vicehas started.
Open log file <file name>
(In the print server mode) The specified log file
hasbeen opened.
Print queue <print queue name> cannot be ser-
vicedby printer 0, <print server name>
(In the print server mode) The print queue can-
notbe established. Make sure that print queue
existson the specified file server.
Print server <print server name> has no printer
(In the print server mode) The printer is not
assignedto the print server. Using NWadmin, as-
sign theprinter, and then restart it.
print sessions full
No more print jobs can be accepted. Wait a
whilebefore sending any more print jobs.
Printer <printer name> has no queue
(In the print server mode) The print queue is no-
tassigned to the printer. Using NWadmin, assign
theprint queue to the printer, and then restart it.
pserver start. (NetWare)
(In the print server mode) The NetWare service
hasstarted.
Required file server (<file server name>) not
found
The required file server is not found.