Pitney Bowes DP50S Color Printer - Manual (Page 153)

Enabling/disabling specified IPv4 destination
msh> route active {host|net} “destination” {on | off}
• You can turn the specified destination on or off. Host becomes the default setting.
Adding IPv4 Routing Table
msh> route add {host|net} “destination” “gateway”
• Adds a host or network route to “destination”, and a gateway address to “gateway” in
the table.
• Specify the IPv4 address to destination and gateway.
• Host becomes the default setting.
Setting default IPv4 Gateway
msh> route add default gateway
Deleting specified IPv4 destination from Routing Table
msh> route delete {host|net} “destination”
• Host becomes the default setting.
• IPv4 address of destination can be specified.
Setting IPv6 Default Gateway
msh> route add6 default gateway
Adding a specified IPv6 destination to Routing Table
msh> route add6 “destination” “prefixlen” “gateway”
• Specify the IPv6 address to destination and gateway.
Deleting a specified IPv6 destination from Routing Table
msh> route delete6 “destination” “prefixlen”
• Specify the IPv6 address to destination and gateway.
Display information about a specified IPv6 route information
msh> route get6 “destination”
• Specify the IPv6 address to destination and gateway.
Enabling/disabling a specified IPv6 destination
msh> route active6 “destination” “prefixlen” {on | off}
Route initialization
msh> route flush
4
Remote Maintenance by telnet
• The maximum number of IPv4 routing tables is 16.
• The maximum number of IPv6 routing tables is 2.
• Set a gateway address when communicating with devices on an external network.
155