Pitney Bowes DP50S Color Printer - Manual (Page 33)

1
Using as a NetWare Print Server / Remote Printer
9. Click [Port], and then click [Add].
10. Click [Network Printer], and then click [OK].
11. Double-click the name of the NetWare file server on the network tree.
The created queue is displayed.
12. Select the print queue, and then click [OK].
13. Check that the port of the selected printer is displayed in [Port].
14. Click [Continue].
The printer driver installation starts.
15. Click [Finish] in the [Select Program] dialog box.
16. After the installation is completed, select one of the options to restart the computer either now or later, and
then click [Finish].
Restart the computer to complete installation.
17. After restarting the computer, open the printer properties from the [Printers and Faxes]
window.
Under Windows 2000/Vista or Windows Server 2003/2003 R2/2008, launch the [Printers]
window, and then open the printer properties.
18. Click the [NetWare setting] tab.
Under Windows 2000/Vista or Windows Server 2003/2003 R2/2008, on the [Printer Settings]
tab, clear the [Form Feed] and [Enable Banner] check boxes.
Do not select these check boxes since they are automatically selected by the printer driver. If
you select the check boxes, the printer may not print correctly.
19. Click [OK] to close the printer properties dialog box.
• To stop installation of the selected software, click [Cancel] before installation is complete.
• The protocol is set to inactive as default. Enable it using SmartDeviceMonitor or Telnet.
When using the PostScript 3 Printer Driver
• In an IPv6 environment, Netware servers cannot be used.
Follow the procedure below to set up the PostScript 3 printer driver.
1. In the [Printers] or [Printers and Faxes] window, open the printer properties.
35