Altera Transceiver Signal Integrity Development Kit, Stratix V GT Edition - Manual (Page 38)

2–30 Chapter 2: Board Components
General User Input/Output
Transceiver Signal Integrity Development Kit May 2014 Altera Corporation
Stratix V GT Edition Reference Manual
Table 2–27 lists the user-defined LED component reference and the manufacturing
information.
Character LCD
The development board includes a single 14-pin 0.1" pitch dual-row header that
interfaces to a 16 character × 2 line Lumex LCD display. The LCD has a 14-pin
receptacle that mounts directly to the board's 14-pin header, so it can be easily
removed for access to components under the display. You can also use the header for
debugging or other purposes.
Table 2–28 summarizes the LCD pin assignments. The signal names and directions are
relative to the Stratix V GT device.
D22 USER_LED_4 2.5-V C34
D23 USER_LED_5 2.5-V C33
D24 USER_LED_6 2.5-V F32
D25 USER_LED_7 2.5-V E32
Table 2–26. User-Defined LED Schematic Signal Names and Functions (Part 2 of 2)
Board Reference Schematic Signal Name I/O Standard Stratix V GT Device Pin Number
Table 2–27. User-Defined LED Component Reference and Manufacturing Information
Board Reference Device Description Manufacturer
Manufacturer
Part Number
Manufacturer
Website
D18–D25
Green LEDs, 1206, SMT,
Clear Lens, 2.1 V
Lumex Inc. SML-LX1206GC-TR www.lumex.com
Table 2–28. LCD Pin Assignments, Schematic Signal Names, and Functions
Board Reference
(J30)
Schematic Signal Name I/O Standard
Stratix V GT Device
Pin Number
Description
4 LCD_D_Cn 2.5-V B14 LCD data or command select
5 LCD_Wen 2.5-V B13 LCD write enable
6 LCD_EN 2.5-V A14 LCD chip select
7 LCD_DATA0 2.5-V A13 LCD data bus
8 LCD_DATA1 2.5-V B16 LCD data bus
9 LCD_DATA2 2.5-V A16 LCD data bus
10 LCD_DATA3 2.5-V C15 LCD data bus
11 LCD_DATA4 2.5-V C14 LCD data bus
12 LCD_DATA5 2.5-V D15 LCD data bus
13 LCD_DATA6 2.5-V D16 LCD data bus
14 LCD_DATA7 2.5-V F14 LCD data bus