Altera Transceiver Signal Integrity Development Kit, Stratix V GT Edition - Manual (Page 45)

Chapter 2: Board Components 2–37
Power Supply
May 2014 Altera Corporation Transceiver Signal Integrity Development Kit
Stratix V GT Edition Reference Manual
Table 2–38 lists the flash memory component reference and manufacturing
information.
Power Supply
The development board’s power is provided through a laptop style DC power input.
The input voltage must be in the range of 14 V to 20 V. The DC voltage is then stepped
down to the various power rails used by the components on the board.
An on-board multi-channel power monitor device (LTC2978) measures both the
voltage and current for several specific board rails. This device has the capability to
trim voltage outputs ±10%.
F7 F_BSYN 1.8-V AR7 Ready
B4 F_CEN 1.8-V AP9 Chip enable
E6 F_CLK 1.8-V AN6 Clock
F2 F_D0 1.8-V AN11 Data bus
E2 F_D1 1.8-V AM11 Data bus
G3 F_D2 1.8-V AP12 Data bus
E4 F_D3 1.8-V AN12 Data bus
E5 F_D4 1.8-V AN10 Data bus
G5 F_D5 1.8-V AM10 Data bus
G6 F_D6 1.8-V AR11 Data bus
H7 F_D7 1.8-V AR10 Data bus
E1 F_D8 1.8-V AT12 Data bus
E3 F_D9 1.8-V AU13 Data bus
F3 F_D10 1.8-V AU12 Data bus
F4 F_D11 1.8-V AU11 Data bus
F5 F_D12 1.8-V AT11 Data bus
H5 F_D13 1.8-V AW13 Data bus
G7 F_D14 1.8-V AV13 Data bus
E7 F_D15 1.8-V AW11 Data bus
F8 F_OEN 1.8-V AN9 Output enable
D4 F_RSTN 1.8-V AL8 Reset
G8 F_WEN 1.8-V AM8 Write enable
C6 F_WPN 1.8-V AP6 Write protect
Table 2–37. Flash Pin Assignments, Schematic Signal Names, and Functions (Part 2 of 2)
Board
Reference (U21)
Schematic Signal
Name
I/O Standard
Stratix V GT Device
Pin Number
Description
Table 2–38. Flash Memory Component Reference and Manufacturing Information
Board Reference Description Manufacturer
Manufacturing
Part Number
Manufacturer
Website
U21 1-Gb synchronous flash Micron PC28F00AP30BF www.micron.com