CIRCUTOR CIRe3 Series - Manual (Page 26)

CIR-e 3
Pag 26 of 50 Instructions manual
6.3.2.3 Connect
Another option of the CIR-e.exe application is “Connect”. This option automatically connects
with the main page of the CIR-e³Web application, as shown on the following picture.
Fig. 6-16.- Main screen after connecting to CIR-e
3
Web
The purpose of this option is to allow the user to immediately access this Web page to display
the data sent from the application, ensuring that the user doesn’t have to run other programs to
access the Web.
6.3.2.4 Exit
The “Exit” option closes the application and cancels the unit's setup file creation process.
6.3.2.5 Send to Web
The “Send to Web” button will be explained in detail in section 6.9 TRANSFERRING data to the
application CIRe3Web. This paragraph describes only how the data recorded by CIR-e³ are
sent to the CIR-e³ Web application.
6.4 SD card insertion
Insert the analyzer's SD memory card after creating the analyzer's setup file with the CIR-e.exe
application and recording the file generated (with an xst extension) in the root directory of the
SD memory card.
Fig. 6-17.- SD memory position for insertion
The SD card should be inserted in the card slot before starting the unit, otherwise, the analyzer
will be configured automatically with the default file described in section 6.3.2.1