CIRCUTOR CIRe3 Series - Manual (Page 35)

CIR-e 3
Instructions manual Pag. 35 of 50
6.8 INSERT SD memory card in a PC
Insert the SD card into your computer or SD card reader and run the CIRe.exe software,
located in the root directory of the SD memory card.
Fig. 6-28.- Icon of CIR-e.exe, software for data processing
The CIRe.exe software allows sending the data recorded in the SD memory card to the web
processing software CIR-e³Web. Such web software allows the user the display of recorded
data and the exploitation of all information previously recorded in the SD card.
The procedure followed to send data to CIR-e³Web is explained in section 6.9.
6.9 TRANSFERRING data to the application CIRe
3
Web
The maximum size of a file which can be sent to the CIRe 3 Web (processing
Web tool) is 64 Mb. For larger files use the software Power Vision or Power
Vision Plus.
In order to send recorded data to the web application CIRe
3
Web you shall need Internet
connection.
After inserting the SD memory card in the computer and running the CIR-e.exe application, as
explained in the previous point, the following window, showing the files in the SD memory card
will be displayed.
Fig. 6-29.- CIR-e.exe window allowing file selection.
To send the recorded files to CIRe 3 Web application, select the file from the displayed list and
click on the button “Send to Web”. In case that you have not selected a file, the Send to Web
button is disabled. Once a file has been selected and sent to web, the application displays the
screen in Fig. 6-30, which allows the configuration of a report name and description, before data
is sent to the web application.