CIRCUTOR CDP-0 - Manual (Page 69)

CDP
Instruction Manual 69
8.- MAINTENANCE AND TECHNICAL SERVICE
In the case of any query in relation to unit operation or malfunction, please con-
tact the CIRCUTOR, SA Technical Assistance Service.
Technical Assistance Service
Vial Sant Jordi, s/n 08232 - Viladecavalls (Barcelona)
Tel.: 902 449 459 (Spain) / +34 937 452 900 (outside of Spain)
email: [email protected]
9.- GUARANTEE
CIRCUTOR guarantees its products against any manufacturing defect for two
years after the delivery of the unit.
CIRCUTOR will repair or replace any defective factory product returned during
the guarantee period.
• No returns will be accepted and no unit will be repaired or replaced if it is
not accompanied by a report indicating the defect detected or the reason
for the return.
• The guarantee will be void if the unit has been improperly used or the
storage, installation and maintenance instructions listed in this manual
have not been followed. "Improper usage" is defined as any operating or
storage condition contrary to the national electrical code or that surpass-
es the limits indicated in the technical and environmental features of this
manual.
• CIRCUTOR accepts no liability due to the possible damage to the unit or
other parts of the installation, nor will it cover any possible sanctions de-
rived from a possible failure, improper installation or "improper usage" of
the unit. Consequently, this guarantee does not apply to failures occur-
ring in the following cases:
- Overvoltages and/or electrical disturbances in the supply;
- Water, if the product does not have the appropriate IP classification;
- Poor ventilation and/or excessive temperatures;
- Improper installation and/or lack of maintenance;
- Buyer repairs or modifications without the manufacturer's authorisation.