Televes HD DTT STB TV on demand access ZAS Hbb - Manual (Page 10)

10
ZAS Hbb
4. Installation of equipment
Different types of televisions and other equipment can be
connected to ZAS Hbb.
The most common forms of connecting it are shown in
this manual. If you have any problems connecting your
adapter, please contact your vendor.
There are two ways to connect the ZAS Hbb adapter to
your TV: by SCART lead or HDMI cable. If your TV has a
HDMI connector, use this type of connection to obtain the
best quality image.
When the connection is made using a SCART cable, the
ZAS Hbb can supply RGB or CVBS signals. By default, the
ZAS Hbb is already configured to supply the CVBS signal,
as some TVs do not support the RGB output. However, for
optimum image quality, it is recommended to select the
RGB option (as long as your TV is compatible with these
signals). To change the configuration from CVBS to RGB, do
it through the “Video Scart format” (see 15.3.3.- Scart video
format).
4.1. Connecting to a TV
- Connect the antenna signal to the RF IN connector of the
ZAS Hbb.
- Connect the audio and video between the ZAS Hbb
and the TV via SCART cable or HDMI connection
(recommended).
- Connect the RJ45 output (Ethernet output) to your
Internet router using an RJ45 patch cable.
- Switch on equipment sets (TV).
- Power the ZAS Hbb through the mains adapter.