Televes HD DTT STB TV on demand access ZAS Hbb - Manual (Page 50)

50
ZAS Hbb
In addition, once you have chosen the scanning filters, an
additional confirmation screen is displayed.
This screen is made of 2 buttons:
“Cancel” to cancel the scanning and keep your current
service plan (button selected by default when entering
the form).
“Confirm”, to confirm the scanning.
Use arrow keys and to choose a button and press OK
to select it and execute the corresponding action.
Use left arrow key to go back to previous screen.
Once confirmed, the scanning starts as described in the
scanning phase of the Installation Wizard section.
During this new scanning, the service plan is updated, but
customizations that you did on favorites lists (see “Favorites
lists” section) or locked channels are not lost.
Note: Before starting a scanning, recordings in progress are
stopped. In addition, a scheduled recording planned to
start during the scanning, will fail.
15.6.5 Logical channel number
This setting allows you to enable or disable the logical
channel number (LCN).
LCN is enabled by default for the countries that support it,
namely: France, Italy, Portugal, UK and Poland.
Channels are numbered and ordered according to the LCN.
For Germany, Spain, Russia and the country “Other” LCN is
not available and hence always disabled.
Channels are numbered incrementally and ordered by
order of discovery during the scanning.
If you disable the LCN for a country that supports the LCN,
channels are renumbered incrementally. Their order does
not change.
15.6.6 Upgrade
This menu is only displayed when a software upgrade, to
a higher version than the one currently installed on the
adapter, is available (on a connected USB device or through
IP, see “Software Ugrade” section).
This screen is made of 2 buttons:
“Confirm”, to confirm the upgrade.
“Cancel” to cancel the upgrade (button selected by
default when entering the form).
Use arrow keys and to choose a button and press OK
to select one and execute the corresponding action.
Use left arrow key to go back to previous menu
(equivalent to selecting “Cancel” button).
15.6.7 Factory reset
This screen allows you to reset the settings to default
factory values. This action also clears the favorite lists and
cancels all schedules.
It is made of 2 buttons:
“Confirm”, to confirm the reset.
“Cancel” to cancel the reset (button selected by default
when entering the form).