Televes HD DTT STB TV on demand access ZAS Hbb - Manual (Page 47)

47
EN
15.5.2 Start padding
This setting allows you to set the duration of the margin
used before a schedule’s start date.
Possible values are: None, 15min (default), 30min, 1h and
2h.
A scheduled recording (based on time or by event) starts at
the planned time minus the start padding.
If 2 recordings have their paddings that overlap, the
padding added (at the end for one recording and at the
beginning for the other one) will be half of the available
time between the recordings.
If there is no time available between 2 recordings, padding
will be set to 0.
Note: The start padding is automatically set to 0 if the
recording is scheduled during the padding timeframe.
For instance, if the start padding is set to 15 minutes
and the recording is scheduled to start in 10 minutes,
then the start padding is automatically set to 0 for this
recording.
15.5.3 End padding
This setting allows you to set the duration of the margin
used after a schedule’s end date.
Possible values are: None, 15min (default), 30min, 1h and
2h.
A scheduled recording (based on time or by event) stops at
the planned time plus the end padding.
15.5.4 Default recording duration
This setting allows you to set the default duration for
recordings based on time.
Possible values are: 30min, 1h, 2h and 4h (default).
15.5.5 Timeshifting
This setting allows you to set the timeshifting mode used.
Possible values are:
Disabled: timeshifting function is not available.
Manual (default): buffering starts only when you press
pause key .
Going back to live resets the timeshifting buffer.
Automatic: the programme is automatically buffered
(temporarily) on the storage device as soon as you zap
onto the channel.
15.6 Advanced Settings
This menu is protected by a password.
Once entered, use arrow keys and to navigate among
the menu elements.
Press arrow key to access to the screen related to an
element.