Televes HD DTT STB TV on demand access ZAS Hbb - Manual (Page 12)

12
ZAS Hbb
5. Installation wizard
Once all equipment connections have been made and the
adapter has been plugged into the electricity mains, when
powering on your product for the first time after purchase,
the installation wizard will operate automatically.
Note: The installation wizard can be rerun from the beginning
by performing a reset to factory settings (see “Factory
reset” section).
5.1 Language selection
First you must select the language in which you would like
the screen menus to be displayed.
Select the menu language using the arrow keys and .
Press arrow key to confirm the selection.
Note: Default audio language is set according to language
selection.
Note: Languages supported are English, French, Spanish,
Italian, Polish, German, Portuguese and Russian.
Note: In all the screens of the installation wizard (except the
first one), press arrow key to go back to previous
screen.
5.2 Menu Positioning
Then you have the possibility to fine-tune the position of
the main menu on the screen.
Press OK key to do so and use arrow keys , , and to
adjust the position of the menu.
Press OK key again to confirm the new position.
Press arrow key to move to next screen.
Note: The positioning area is limited to ± 90 pixels compared
to the factory position.
5.3 Country selection
On the next screen you must indicate the country where
the adapter is installed.
Select the country using the arrow keys and .
Press arrow key to confirm the selection.
Note: Countries supported are England, France, Spain, Italy,
Germany, Poland, Portugal, Russia and Other.
5.4 Region selection (if the country has several
time zones)
This screen is only displayed if you have chosen a country
with several time zones.
Select the region using the arrow keys and .
Press arrow key to confirm the selection.
Note: If you selected the country “Other”, instead of choosing
a region you have to choose your time zone.