Argox AS-9500 - Manual (Page 107)

106
Function Code Transmit
When this selection is enabled and function codes are contained
within the scanned data, the imager transmits the function code to
the terminal.
Function Code Transmit
*Enable
Disable
Intercharacter, Interfunction, and Intermessage
Delays
Some terminals drop information (characters) if data comes
through too quickly. Intercharacter, interfunction, and
intermessage delays slow the transmission of data, increasing data
integrity. Each delay is composed of a 5 millisecond step. You can
program up to 99 steps (of 5 ms each) for a range of 0-495 ms.
Intercharacter Delay
An intercharacter delay of up to 495 milliseconds may be placed
between the transmission of each character of scanned data. Scan
the Intercharacter Delay bar code below, then scan the number of
milliseconds and the SAVE bar code