Argox AS-9500 - Manual (Page 55)

54
Codabar
Check Character
Codabar check characters are created using different “modulos.”
You can program the imager to read only Codabar bar codes with
Modulo 16 check characters. No Check Character indicates that
the imager reads and transmits bar code data with or without a
check character. When Check Character is set to Validate and
Transmit, the imager will only read Codabar bar codes printed
with a check character, and will transmit this character at the end
of the scanned data. When Check Character is set to Validate, but
Don’t Transmit, the unit will only read Codabar bar codes printed
with a check character, but will not transmit the check character
with the scanned data.
<Default All Codabar Settings>
*On
Off
Start /Stop Character
Transmit
* Don’t Transmit
Check Character
*No Check Character
Validate and Transmit
Validate Modulo 16 and
Transmit
Validate Modulo 16 ,but Don ’t
Transmit