Argox AS-9500 - Manual (Page 87)

86
PosiCode
You have to have PosiCode A and B on to read any of the
PosiCode symbologies.
Message Length
Scan the bar codes below to change the message length. Minimum
and Maximum lengths = 2-80. Minimum Default = 4, Maximum
Default = 48.
Trioptic Code
Note: If you are going to scan Code 32 Pharmaceutical codes,
Trioptic Code must be off. Trioptic Code is used for labeling
magnetic storage media
<Default All PosiCode Settings>
* On
A and B On ( No Limited )
*A and B and Limited B On
( Limited A Off )
Off
A and B and Limited On
( Limited B Off )
Message Length
Minimum Message Length
Maximum Message Length
Trioptic Code