Argox AS-9500 - Manual (Page 62)

61
Code 93
Code 93 Message Length
Scan the bar codes below to change the message length. Minimum
and Maximum lengths = 0-80. Minimum Default = 0, Maximum
Default = 80.
Code Page
Code pages define the mapping of character codes to characters. If
the data received does not display with the proper characters, it
may be because the barcode being scanned was created using a
code page that is different from the one the host program is
expecting. If this is the case, scan the bar code below, select the
code page with which the bar codes were created and scan the
value and the Save bar code from the Programming Chart on the
inside the back cover of this manual. The data characters should
then appear properly.
<Default All Code 93 Settings>
*On
Minimum Message Length
Code 93 Code Page
Off
Maximum Message Length