Argox AS-9500 - Manual (Page 80)

79
EAN/JAN-8
Check Digit
This selection allows you to specify whether the check digit should
be transmitted at the end of the scanned data or not. Default = On.
Addenda
This selection adds 2 or 5 digits to the end of all scanned
EAN/JAN-8 data. Default = Off for both 2 Digit and 5 Digit
Addenda.
<Default All EAN/JAN-8 Settings>
*On
Off
Check Digit
*On
Off
Addenda
2 Digit Addenda On
5 Digit Addenda On
*2 Digit Addenda Off
*5 Digit Addenda Off