Argox AS-9500 - Manual (Page 58)

57
Code 39
Message Length
Scan the bar codes below to change the message length.. Minimum
and Maximum lengths = 0-48. Minimum Default = 0, Maximum
Default = 48.
Append
This function allows the imager to append the data from several
Code 39 bar codes together before transmitting them to the host
computer. When this function is enabled, the imager stores those
Code 39 bar codes that start with a space (excluding the start and
stop symbols), and does not immediately transmit the data. The
imager stores the data in the order in which the bar codes are read,
deleting the first space from each. The imager transmits the
appended data when it reads a Code 39 bar code that starts with a
character other than a space.
Code 39
Minimum Message Length
Append On
Maximum Message Length
*Append Off