ARRIS 2247-N8-10NA (v9.1.x) User Manual - Manual (Page 49)

Motorola 2247-N8 DSL Wi-Fi Gateway User Guide
Please visit www.motorola.com/us/support for FAQs and additional product documentation. 49
How to - configure an assigned Static IP broadband connection:
Open the Broadband > Configure page.
1. Click the Connection Type pull-down menu and choose Static IP.
2. Type the IP address of the service provider interface in the IP Address field. Type the network mask value that defines the network portion of the
provider IP address in the Netmask field.
3. Type the IP address of your service provider’s gateway in the Default Gateway input field.
4. Type the IP address of a DNS server in the Primary DNS Address field. If desired, type an alternate DNS server’s IP address in the Secondary
DNS Address field.
5. Set the Network Address Translation (NAT) and bridging configuration of your 2247-N8:
™ If you are using NAT (with a number of devices on a private wired or wireless network), click the NAT Enable pull-down menu and set it to On.
™ If your ISP requires a routing device on the LAN side of your DSL gateway, click the Bridging pull-down menu and select On, otherwise, leave
it off.
6. Click the Save button to assign the new broadband configuration to the 2247-N8. The broadband interface resets and the 2247-N8 will go through
broadband negotiation.