ARRIS 2247-N8-10NA (v9.1.x) User Manual User Manual
Page 92
Motorola 2247-N8 DSL Wi-Fi Gateway User Guide
Please visit
www.motorola.com/us/support
for FAQs and additional product documentation.
92
A new rule of the selected type is added to the
Packet Filter Rules
section of the page.
The new rule contains a default IP Version of “IPv4 or IPv6” rule, which means that both incoming IPv4 and IPv6 addressed packets will match the
rule.
2. Click the
Add Match...
button of the new rule to specify the first filtering criterion of the rule. A
Match Entry
window opens.
3. Click the
Match Type
pull-down menu. Choose the type of “test” that you want the match entry to apply to all packets.
Source IP Address, with an input field for the IP address to match.
Destination IP Address, with an input field for the IP address to match.
Protocol, with sub-selections; TCP, UDP, by number, or by name, with an input field for number or name values.
Ingress Interface, with a pull-down submenu to choose the incoming LAN or WAN interface.
Egress Interface, with a pull-down submenu to choose the outbound LAN or WAN interface.
Source MAC Address, with a list of known devices and a manual MAC address entry input field.
Destination MAC Address, with a list of known devices and a manual MAC address entry input field.
Source Port number, with input fields for the starting and ending port numbers that define the port range.
Destination Port number, with input fields for the starting and ending port numbers that define the port range.
TCP Flag (if Protocol is selected with TCP as a sub-selection), with an activation table for examining or setting TCP packet flags.
ICMP Type (if Protocol is selected with ICMP as a sub-selection), with an entry field for the type match value.