ARRIS 2247-N8-10NA (v9.1.x) User Manual - Manual (Page 53)

Motorola 2247-N8 DSL Wi-Fi Gateway User Guide
Please visit www.motorola.com/us/support for FAQs and additional product documentation. 53
How to - configure an IPv6 DHCP Client setting for the 2247-N8
Open the Broadband > IPv6 page.
1. Click the IPv6 Enable pull-down menu and select On to enable IPv6 service, or Off to disable it (the default).
2. Click the WAN IPv6 Connection Type pull-down menu and select IPv6 DHCP Client.
The fields of the IPv6 page update to show DHCP related configuration settings.
3. If your home (local) network will also use IPv6 addressing, click the IPv6 Enable on LAN pull-down menu and click On. Use the fields below the
IPv6 Enable on LAN menu to set the connection type for your local network:
4. Click the LAN IPv6 Connection Type pull-down menu and select the addressing method defined by your IPv6 6rd connection:
a. If the local network will derive local IPv6 addresses from the broadband IPv6 DHCP server, select Delegated Prefix (the default).
b. If your IPv6 network uses static (assigned) addresses, select Static IP. Type the IPv6 address of your 2247-N8 LAN gateway interface in the LAN
IPv6 Address field.
5. Click the Save button to add the IPv6 Broadband configuration settings. .
How to - set up AICCU IPv6 tunneling
Open the Broadband > IPv6 page.
1. Click the IPv6 Enable pull-down menu and select On to enable IPv6 service, or Off to disable it (the default).
2. Click the WAN IPv6 Connection Type pull-down menu and select AICCU Tunnel.