Avery Dennison Monarch 9906 MonarchNet2 - Manual (Page 22)

2-12 MonarchNet2 Operating Instructions
Transmit Rate
The transmit rate sets the maximum speed at which the devices communicate with each
other on the network. The speeds are in Mbps (megabits per second). Choices include:
1, 2, 5.5, 11, 12, 18, 24, 36, 48, or 54. The transmit rate is negotiated with the access
point and this setting may be ignored.
To change the setting, from the Setup Menu, select Network, then Wireless. Then follow
these steps.
1. Press  or  until you see Transmit Rate.
2. Press CHANGE to highlight Transit Rate. The current setting is shown. Press
 or  to scroll through the options.
3. When you see the Transmit Rate you need, press SET to save the change. Press
CANCEL
to leave it unchanged.
4. Press BACK until you return to the Home/Online screen.
WIRELESS
←Transmit Rate→
54
CHANGE BACK
WIRELESS
Transmit Rate
1 →
SET CANCEL