Avery Dennison Monarch 9906 MonarchNet2 User Manual
Page 32
Advertising
3-6
MonarchNet2 Operating Instructions
R e s e t / I n i t i a l i z e N e t w o r k
1. From the side menu bar, click Network Configuration.
2. Select the Protocols tab.
3. Click the Save/Re-init Network to reset and initialize the network interface. Any
changes made on previous screens do not take effect until you click Reset Network.
This process may take a few minutes for the printer to respond with the new settings.
C o n f i g u r i n g t h e N e t w o r k S e t t i n g s
You can configure the print server to operate on your network.
1. From the side Menu Bar, click Network Configuration.
2. Select one of the following tabs: Protocols, SNMP, Wireless, or Alerts.
R e s e t B u t t o n
Advertising