Avery Dennison Monarch 9906 MonarchNet2 - Manual (Page 31)

Using a Web Browser 3-5
9. Enter a value for the Print Position (range is –450 to 450). This adjusts where data
prints vertically on the supply.
10. Enter a value for the Margin Position (range is –99 to 99). This adjusts where data
prints horizontally on the supply.
11. Click Submit when finished.
Changing the System Setup
Only configure the settings required for your network/printer.
1. On the System Setup tab, set the Flash Storage: Enabled or Disabled. Flash
storage allows packets with “R” or “N” selectors to be stored in Flash Memory, instead
of volatile RAM. Packets stored in flash memory are saved when the printer is turned
off.
2. Set the Speed Adjustment: Default, 2.5, 4.0, or 6.0. If you select “Default,” serial
bar codes print at 2.5 ips; parallel bar codes print at 6.0 ips.
3. Set the Power Up Mode: Online or Offline.
4. Select the Prompt Set: English, French, German, Spanish-ES, Japanese,
Portuguese, Italian, Swedish, Spanish-MX, Danish, Dutch, Finnish, Norwegian, Polish,
Turkish, or Simplified Chinese.
5. Set the Monetary Sign: None, USA, UK, Japan, Germany, France, Spain, Italy,
Sweden, Finland, Austria, India, Russia, Korea, Thailand, China, Euro-Dollar.
6. Set the Secondary Sign: No or Yes.
7. Set the number of Decimal Places: 0, 1, 2, or 3.
8. Select Slashed Zero to print zeros with a slash (Ø): No or Yes.
9. Click Submit when finished.