Avery Dennison SNAP 700 RFID Linear Knife - Manual (Page 10)

10

Maintenance Snap Linear Knife
Maintenance
Cleaning Feed / Nip Rollers
The Linear Knife has a set of feed rollers that keep web tension between the
printer feed and the accessory knife. These rollers will need cleaning daily or
more often based on the materials being run,
1. Clean the rollers with isopropyl rubbing alcohol 70%. Do not use other
cleaning products as they may have a long term effect to roller life.
2. Turn off the power to the printer to clean any moving part to avoid
injury or damage to the printer
3. Apply the alcohol to a clean cloth and rub the rollers to remove any
surface build up. The rubber roller may become stained for contact
with the materials running through the printer. This should not harm
the roller or the material.
4. The rubber roller should be replaced at least once a year or before due
to ware or if the rubber starts to harden from age or UV lighting.