Avery Dennison SNAP 700 RFID Linear Knife - Manual (Page 8)

8

Description / Specifications Snap Linear Knife
Description / Specifications
Linear Knife Description
The SNAP Linear Knife is an add-on accessory for the SNAP 700 printer. It
mounts in place of the down stacker and in turn provides a mounting for the
down stacker.
The Linear Knife is designed to cut tag stock and stack into the down stacker. It
does not work with flimsy material such as care label tapes or pressure sensitive
materials.
The Linear Knife is removable if the other materials need to be processed on the
printer using the rotary knife. A training technician is required because the entry
into the printer electronics is required.
Linear Knife Specifications
Label Size
Length: Min 1 1/2” (38.10mm) Max (See Printer Specs)
Width: Min: 1 1/2” (38.10 mm) TESTED, Max: 5 1/8" (130.18 mm) wide web
Print Speed 3ips, 4ips, 4.5ips, 5ips, 6ips, (RFID 2ips and 3ips) TESTED
Web Justification Center
Stock Coated and uncoated Tag Stock and RFID tag stock 10 point to 15 point TESTED
Cleaning RFID supplies require knife blade cleaning every 25,000 cuts based on supply adhesive construction
Dimensions 11.00" (279.40 mm) wide x 17.25" (438.15 mm) deep x 18.00" (457.20 mm) high
Weight 34 Lbs. (15.5Kg.)
Electrical DC Power, source is from the SNAP 700 Printer
Temperature 55°F - 95°F (12.7°C to 35°C)
Humidity 5% - 90% non-condensing without corrosion to finish
Registration
System Blank stock, 1/16”(1.5mm) to 1/8” (3mm) hole, notch 1/16”(1.5mm) min., top reflective,
bottom reflective (80% contrast).
Hole or reflective mark can be any were across the web.
Options N/A