Avery Dennison SNAP 700 RFID Linear Knife User Manual
Page 31
Advertising
Snap Linear Knife
Adjustments
31
7.
Tighten the E-S Nut and the thumbscrew.
8.
Feed the web through the knife and run
some sample labels to see if the web is
centered through the knife.
9.
If web is not centered, repeat steps to take
off upper half of knife and move
mounting bracket to a more desired
location.
Repeat until there is the same amount of
distance between the edge of the rollers
and the sides of the web.
Equal distance
Advertising