Removing the rear cover – Avery Dennison SNAP 700 RFID Linear Knife User Manual
Page 39
Advertising
Snap Linear Knife
Appendix A
39
Removing the Rear Cover
1.
Turn off the power to the printer at the end of a
batch so not to lose downloaded data and
disconnect power cord.
2. Unplug all peripherals such as stacker, remote
display, verifier, etc.
Unplug power cord from wall outlet.
Remove the stock and ink.
Remove the back cover of the printer by removing
(10) button head cap screws using a 3/32 Allen Key
or T-Handle.
Advertising