Step 3: try the demo – BrightSign HD2000 User Guide User Manual
Page 13
7
•
•
•
•
•
•
3
Extract the software update file onto your CF/SD card. (The file name is UPDATE.ROK.)
4
Insert the CF/SD card into your BrightSign and apply power.
• HD600: Wait for your BrightSign to boot. (The display will be blank.) After several seconds one
of the LEDs on the front panel starts to flash. When the LED stops flashing, the upgrade is
complete and BrightSign reboots automatically.
• HD2000: Wait for your BrightSign to boot. (The display will be blank, but the LEDs on the front
panel light as the unit boots.) Wait for the red upgrade LED to light up. During the upgrade,
the connector activity LEDs turn on and off to indicate that the upgrade is in progress.
NOTE:
When the update finishes, BrightSign deletes the UPDATE.ROK file and reboots the unit.
However, if the card was formatted with NTFS or HFS+, then BrightSign does not delete the
UPDATE.ROK file and the unit doesn’t reboot after the update. Instead, the Video Mode LEDs flash.
Step 3: Try the demo
The BrightSign demo shows an example of an interactive digital sign that displays still slides and
video clips, and responds to input from a button board, touch screen, or mouse. It’s easy to try if
you have a BrightSign. Follow these steps:
1
Go to
.
2
Click the Demo link under HD600 or HD200 and download the demo file.
3
Unzip the BrightSignDemo.zip file and copy the contents into the root directory of a
Compact Flash or SD (CF/SD) card.
4
Connect your BrightSign to either of the following:
• Elo touch screen
• Standard monitor and USB Mouse
• Standard monitor and Roku Button Board
5
Insert the CF/SD card.
6
Turn on the power.