BrightSign HD2000 User Guide - Manual (Page 30)

24
•
•
•
•
•
•
waitbuttonany
Use this command when you want the playlist to pause until any GPIO buttons is pressed.
pause #
Use this command when you want the playlist to pause for a specified number of seconds.
The number must be an integer. For example, to pause for 5 seconds, the command would be:
pause 5
stop
Use this command to stop playback of the playlist.
Creating interactive presentations
With BrightSign you can create presentations that respond to input from the user. For example,
you can let customers choose which video to watch by pressing the button associated with the
video of their choice. Interactive presentations also respond to user input from touch screens,
mice, serial or USB keyboards, and barcode scanners (see
Supported input devices for a
complete list of supported input devices). To accomplish this with BrightSign, you need to
specify the input device, and you need to do either of the following:
• Use Microsoft Excel to create a control table and use the BrightSign interactive playlist mode
(see the next section, Using Excel to create interactive presentations for details).
• Create a custom control script (see the next chapter,
Working with Scripts for details).