BrightSign HD2000 User Guide - Manual (Page 34)

28
•
•
•
•
•
•
IMAGEMODE
• 0: Centers the image and no scaling takes place. If the image is bigger than the screen,
BrightSign crops the image.
• 1: Scales the image to fit so that it is fully viewable with its aspect ratio maintained.
• 2: Scales and crops the image so that it totally fills the screen with its aspect ratio maintained.
• 3: Scales the image so that it fills the screen and the whole image is viewable. This means that
the is stretched and the aspect ratio may not be maintained.
VIDEOPLAYERAUDIOMODE <audio mode> (HD2000 only)
Sets the audio mode used when playing a video
• 0: Sets the audio to AC3 surround.
• 1: Mixes AC3 surround audio down to stereo.
• 2: Mutes the audio.
VIDEOPLAYERAUDIOOUTPUT <audio output> (HD2000 only)
Sets the audio output when playing a video
• 0: Outputs analog audio.
• 2: Outputs SPDIF audio in stereo PCM.
• 3: Outputs SPDIF audio in raw AC3.
• 4: Outputs analog audio with SPDIF mirroring raw AC3.
VIDEOPLAYERAUDIOSTEREOMAPPING <stereo mapping> (HD2000 only)
Sets the analog output when playing a video. Use this parameter when the
VIDEOPLAYERAUDIOOUTPUT parameter is set to 0 – Analog audio.
• 0: Maps stereo audio to Audio 3.
• 1: Maps stereo audio to Audio 2.
• 2: Maps stereo audio to Audio 1.